分析离心油泵性能的新方法

提出一种利用已知泵性能曲线深入分析离心油泵性能的新方法。首先列出离心泵内部流动能量平衡关系式和离心泵基本方程并分别对其求导 ，根据实验数据，联立求解方程计算出滑移系数、水力损失系数、容积效率、水力效率和机 械效率等参数随叶片数的变化关系，深入研究了叶片数对性能的影响。结果表明，滑移系数随叶片数增加而增大；叶片数通过改变叶轮滑移系数和水力效率来影响泵的水力性能；降低叶轮圆盘摩擦损失是提高离心油泵性能的关键。     

An IR study on ion-specific and solvent-specific swelling of poly(N-vinyl-2-pyrrolidone) gel

Swelling degrees of poly(N-vinyl-2-pyrrolidone) (PVP) gel were measured in aqueous salt solutions and in water/organic solvent mixtures to find marked ion- and solvent-specificities. In order to investigate any correlation of those specificities with hydration or solvation of PVP, IR spectra band of the CO group was monitored by means of ATR method both for PVP gel and the relevant solution systems. Dependence of the peak frequency on the swelling ratio suggested that hydration of PVP carbonyl group in deswollen gel systems is different from that in the corresponding solution systems. In the solution systems, PVP carbonyl band showed a high-wavenumber shift for deswollen systems, which can be well correlated with changes in water proton charge through ionic hydration and with Gutmann's acceptor number of organic solvents. In the deswollen gel systems, the CO band showed a low-wavenumber shift, suggesting a strong hydration or doubly hydrated state. This unexpected behavior was interpreted by assuming an intermolecular hydrogen bond of two carbonyl groups intermediated by water molecules.     

车号定位识别与可信度估计

以车号的定位与识别为例，应用行投影法对车号图片进行倾斜行定位，证明了模拟与场景的二维互相关系数近拟等于一维投影互相关系数，在此基础上提列投影法快速行扫描识别算法及相应的可信度估计方法，这种方法对于室外拍摄的有复杂背景，光照变化，字体微倾，字符排列疏密不均及噪声干扰的车牌图像具有很好的识别效果。     

烷基化原料预加氢工艺应用分析

由于来自催化裂化装置的烷基化原料中所含有的丁二烯在烷基化反应中可生成重质油,使产品干点上升,辛烷值下降,并使酸耗增加.针对这种状况,齐鲁石化公司研究院和胜利炼油厂联合开发了QSH-01烷基化原料预加氢催化剂及其相应的工艺技术,来脱除原料中丁二烯.笔者对该工艺技术及其应用作了阐述,并对该技术的应用前景作出分析.     

YAG：Ce Phosphors for WLED via Nano-Pesudoboehmite Sol-Gel Route

The sub-micron sized YAG ： Ce phosphors were synthesized via a modified sol-gel method by peptizing nano-pesudoboehmite particulate. It is found that YAG phase from the dried gel powders appears at 1000 ℃ then the pure YAG phase exists at a relatively lower sintering temperature of 1400 ℃. The smaller sizes of phosphors in the ranges of 1 - 3 μm are obtained due to the contribution of seeding effects of nano-sized alumina particles to strengthen each step of the processes. Both the excitation and emission spectra of photoluminescence of the phosphor obtained at 1400 ℃ meet well with the spectroscopic requirements of the WLED phosphors.     

在线近红外光谱分析仪在汽油自动调合系统中的应用

在线近红外光谱分析仪可以实时测定汽油调合组分及成品油的多种物化性质指标如烯烃、芳烃、苯及氧化物含量、辛烷值（RON、MON）、馏程、蒸气压等。文章介绍了用于汽油自动调舍工艺中的在线近红外光谱分析仪的原理、系统组成和特点，以及在国内外的汽油调合优化控制中的实际应用情况。典型的应用实例表明，将该分析仪用于汽油自动调合工艺中，可为炼油厂带来可观的经济效益和社会效益。     

冷却排管的节能设计

从节能的观点出发，根据热力学原理和传递过程的理论，对冷却排管内湍流传热过程进行分析，研究损失随雷诺数的变化规律，探讨冷却排管的节能设计问题。     

Two- or three-stage least squares?

Two elements enter the choice between 2 and 3SLS for full-system estimation: statistical efficiency and computational cost. 2SLS always has the computational edge, but 3SLS can be more efficient, a relative advantage that increases with the strength of the interrelations among the error terms. A measure of these interrelations is thus helpful in making the choice, and, when there are only two equations, this has suggested using a high pairwise error correlation as an indicator of when to use 3SLS. In larger systems of equations, however, these pairwise correlations can remain small even though more general interrelations give 3SLS the relative advantage. More general indicators are therefore needed, and this paper suggests three such and demonstrates their efficacy.Professor of Economics, Boston College, and Principal Research Associate, Center for Computational Research in Economics and Management Science, MIT. All computation was done on the TROLL system at MIT. My thanks go to Josh Charap for his able research assistance. This research was sponsored in part by the National Science Foundation under grant #IST-8420614.     

微加速度计粘附问题的研究及应用

粘附是影响微机电系统(MEMS)可靠性的重要因素之一。针对MEMS的典型产品——微加速度计的粘附问题进行了研究,给出了2种典型的微加速度计的表征粘附特性的剥离数的表达式,并分析了将粘附条件应用于微加速度计的多学科设计优化之中,分析了其对系统结构设计产生的影响。     

一种微通道换热器的设计与分析(英文)

设计了一种用来测试微通道换热性能的实验装置。该系统由微通道换热器、模拟热源、微型水泵、连通管、测试三通及其它测试元件构成。通过检测温度、压力和流量等参数能够得到微通道的传热和摩阻参数。针对该实验装置,对微通道中流体的压降和传热分别进行分析和研究。实验表明,当微通道水力直径为381μm时,宏观理论公式已不适用于微通道摩阻及其换热的计算。此时,微通道的摩阻比宏观理论计算值小31.6%～41.9%;微通道结构具有良好的换热性能,其Nu可达9.2。